Configuration
Video Loss Screen
1.Highlight Video Loss in the Event menu and press 
. The Video Loss setup screen (Figure
Figure 3-67 Video Loss Settings Screen
2.The DVR checks to see if anything is obscuring the camera. Highlight the slider bar beside Check Obscuration, and use the Left and Right arrow buttons to adjust the setting. The sensitivity can be set from Never to 255 (extremely sensitive).
3.Highlight the Actions 1 and Actions 2 tabs and the Video Loss Actions 1 and Actions 2 screens display.
Figure 3-68 Video Loss Actions 1 Screen
The DVR can be set to react to video loss differently for each camera. Each camera can be associated with another camera, trigger an
4.Highlight the box under the Record heading and press 
. A list of cameras appears. You can associate as many cameras with that camera as you wish. If the DVR detects video loss on the selected camera, it starts recording video from all the associated cameras.
Document 900.0856 Rev B | 83 |
02/08 |
|
