Configuration
2.Highlighting Recycle and pressing 
toggles between On and Off. In the Recycle mode, the DVR records over the oldest video data once all available storage space has been used. When Recycle is turned off, the DVR stops recording once all available storage space has been used.
3.Highlight the Resolution box and select from High and Standard. All other variables being equal; selecting High resolution will decrease the recording and playback speed by half that of Standard resolution.
4.Highlight the Event Record Dwell box and set the length of time you would like to record for the associated event. You can set the dwell from 5 seconds to 15 minutes. Refer to Event Settings, page 75, for more information regarding event recording.
5.Highlight the slide bar beside Auto Deletion, and use the Left and Right arrow buttons to adjust the length of time recorded data will be kept from 1 to 99 days. The DVR automatically deletes video recorded earlier than the
6.Highlighting Use Panic Recording and pressing 
toggles between On and Off.
7.Highlight the Panic Recording - Duration box and set the duration of panic recording. Panic recording will stop automatically after the preset duration as long as the PANIC button is not pressed to stop the panic recording. You can set the dwell from 5 minutes to 1 hour. Select No Limit if you only want to stop panic recording manually.
8.Highlighting the Panic Recording - ips and pressing 
allows you to set the images per second for Panic recording. You can select from 0.10 to 30.00 images per second.
9.Highlighting the Panic Recording - Quality and pressing 
allows you to set the recorded image quality for Panic recording. You can select from: Very High, High, Standard and Low.
10.You can save your Record settings by highlighting Save and pressing 
. Selecting Cancel exits the screen without saving the changes.
Schedule Screen
1.Highlight Schedule in the Record menu and press 
, and the Schedule setup screen (Figure
Document 900.0856 Rev B | 71 |
02/08 |
|
