Configuration
Figure 3-26 Port Numbers Setup Screen
d.Change the numbers by highlighting them and using the Up and Down arrow buttons to increase or decrease the number.
The factory default Port settings are:
Remote Admin: | 8200 |
Remote Callback: | 8201 |
Remote Watch: | 8016 |
Remote Search: | 10019 |
Note The system restarts automatically after changing the port settings.
Note Do NOT use the same port number for two different programs, otherwise, the DVR cannot be connected with the PC running RAS or WebGuard.
Caution When changing the port settings, you must change the port settings on the PC running RAS or WebGuard as well. Refer to the RAS Plus User Manual for details.
4.Selecting DHCP from the Type and highlighting Save reads the current IP address of the DVR configured by DHCP (Dynamic Host Configuration Protocol) network.
54
