Honeywell HRXD16, HRXD9 manual Alarm-In Notify Menu

Configuration

You can set the actions the DVR will take whenever it senses an input on one of its alarm input connectors.

7.Highlight the desired box under the Record heading, and press . A list of cameras appears. Select the cameras that you want the DVR to record whenever it detects an input on the associated alarm input.

Note For the Record action, the camera you select should be set to the Event or Time & Event recording mode in the Record Schedule setup screen.

8.Highlight the desired box under the Alarm-Outheading, and press . A list of Alarm Outputs and Beep appear. Select the Alarm Output connectors that you would like to activate whenever the DVR detects an input on the associated alarm input. You can also set the DVR’s internal buzzer to sound.

Note For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in the Alarm-Out setup screen, Schedule tab (see Alarm-Out Screen, page 65).

9.Highlight the desired box under the Notify heading, and press . The Alarm-In Notify menu (Figure 3-57) appears.

Figure 3-57 Alarm-In Notify Menu

10.You can toggle the entire list On and Off by highlighting Notification and pressing

. You can toggle the individual items On and Off by highlighting that item and

pressing . Highlight OK and press to accept your changes.

Note For the Notify action, the notify item you select should be enabled in the Notification setup screen and the DVR should be registered in the RAS (Remote Administration System).

Document 900.0856 Rev B	77
02/08