Configuration

Note

Mail notify is the only option available for the System event.

 

 

Note For the Notify action to work, the DVR should be registered in the

RAS (Remote Administration System).

17.You can save your System Event changes by highlighting Save and pressing . Selecting Cancel exits the screen without saving the changes.

Event Status Screen

Highlight Event Status in the Event menu and press . The Event Status screen (Figure 3-80) appears.

Figure 3-80 Event Status Screen

The Event Status screen displays the status of the DVR’s systems and inputs. The following events will be highlighted, and related channels or events will flicker for five seconds when detected:

Alarm-In, Motion, Video Loss and Text-Inwill be highlighted when each event is detected based on the settings you made in the Alarm-In, Motion Detection, Video Loss and Text-In setup screens on the Event menu.

Check Alarm-Inand Check Recording will be highlighted when each event is detected based on the settings you made in the System Event setup screen on the Event menu.

Panic Record will be highlighted while the DVR is in the panic recording mode.

Document 900.0856 Rev B

93

02/08

 

Page 93
Image 93
Honeywell HRXD16, HRXD9 manual Event Status Screen