Configuration

Alarm-Out Screen

1.Highlight Alarm-Outin the Devices menu and press . The Alarm-Out screen (Figure 3-41) allows you to change the settings and establish a schedule for each alarm output from the DVR.

Figure 3-41 Alarm-Out Settings Screen

2.Each alarm output can be given its own title by highlighting the box under the Title heading and pressing . A virtual keyboard appears allowing you to enter the title.

3.Highlighting the boxes under the Type heading allows you to set the alarm output for NO or NC (normally open or normally closed).

4.Highlighting the box beside Dwell Time and pressing allows you to set the dwell time of the alarm output. Dwell times range from 5 seconds to 15 minutes.

5.Highlighting the Schedule tab causes the Schedule screen (Figure 3-42) to display.

Figure 3-42 Alarm-Out Schedule Screen

6.You can add and edit alarm output schedules on this screen. Highlight the + and

press to add a schedule. Highlighting the boxes in the columns and pressing

allows you to edit the information in those boxes.

Document 900.0856 Rev B

65

02/08

 

Page 65
Image 65
Honeywell HRXD16, HRXD9 manual Alarm-Out Screen, Alarm-Out Settings Screen