Installation
If you would like to connect your video source to another device, you can use the Loop BNC connectors.
Note The Loop BNC connectors are auto terminated. Do NOT connect a cable to the Loop BNC unless it is connected to a terminated device because it will cause poor quality video.
Connecting the Monitor
Figure 2-4 Video Out Connectors
Connect the main monitor to either the Video Out or SVHS Out connector.
Note Use the SVHS input if your main monitor supports it because it will give you better quality video display.
Note The Video Out (BNC) and SVHS Out connectors may be connected to individual monitors for simultaneous operation.
Up to four Spot monitors can be connected to the DVR. Connect the spot monitors to the SPOT 1, SPOT 2, SPOT 3 and SPOT 4 connectors as needed.
Note When the DVR is in Search mode, it can display live video on the SPOT 1 monitor as displayed on the main monitor during the live mode.
Document 900.0856 Rev B | 23 |
02/08 |
|
