Honeywell HRXD9, HRXD16 manual Modem Setup Screen

Configuration

Note If the DVR is configured for DHCP or an ADSL network, the

DVR’s IP address might change whenever the unit is turned on.

Modem Setup

1.Highlight the Modem tab, and the Modem screen (Figure 3-29) displays.

Figure 3-29 Modem Setup Screen

Note If the RS232 port is in use for remote control, networking cannot be configured for a modem.

2.Highlight Enable and press to toggle between On and Off. You will only be able to change the settings if Modem is enabled.

3.Highlight the box beside Baud Rate and press . A list of baud rates ranging from 300 to 115,200 appears.

4.Highlight the box beside Data Bit and press . Choose between 7 bit and 8 bit formats.

5.Highlight the box beside Stop Bit and press . Choose between 1 and 2 Stop Bits.

6.Highlight the box beside Parity and press . A drop-down list appears. You can select from None, Odd or Even parity.

56