Honeywell HRXD9, HRXD16 manual Text-In Actions 1 Screen

Configuration

Figure 3-73 Text-In Actions 1 Screen

The DVR can be set to react to text input. Text input can be associated with cameras, trigger an Alarm-Out connector, sound the DVR’s internal buzzer, notify a number of different devices, move PTZ cameras to preset positions, and/or display a camera on a SPOT monitor.

16.Highlight the box under the Record heading and press . A list of cameras appears. You can associate as many cameras with the Text Input as you wish. If the DVR detects text input, it starts recording video from all the associated cameras.

Note For the Record action, the camera(s) you select should be set to the Event or Time & Event recording mode in the Record Schedule setup screen.

17.Highlight the box under the Alarm-Outheading and press . A list of Alarm Outputs appears. You can associate as many Alarm-Outs with the Text Input as you wish. When the DVR detects text input, it triggers output signals on all the associated Alarm-Out connectors. You can also have the DVR’s internal buzzer sound if text input is detected.

Note For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in the Alarm-Out setup screen, Schedule tab (see Alarm-Out Screen, page 65).

18.Highlight the box under the Notify heading and press . You can toggle the entire list On and Off by highlighting Notification and pressing . You can toggle the individual items On and Off by highlighting that item and pressing .

Highlight OK and press to accept your changes.

88