Honeywell HRXD16, HRXD9 manual Notification Setup, WebGuard Setup Screen

Configuration

Figure 3-31 WebGuard Setup Screen

2.Highlight Use WebGuard Service and press to toggle between On and Off. See Appendix D, WebGuard for detailed descriptions of the WebGuard service.

3.Highlight the box beside Port and press . Set the port number used when accessing WebGuard by using the Up and Down arrow buttons to increase or decrease the numbers.

4.You can save your Network changes by highlighting Save and pressing . Selecting Cancel exits the screen without saving the changes.

Notification Setup

The DVR can be set up to send an e-mail or to contact a computer running RAS (Remote Administration System) when an event occurs.

1.Highlight Notification in the Network menu and press . The Notification screen (Figure 3-32) displays. You will be able to change the Mail and Callback settings.

Figure 3-32 Notification Mail Setup Screen

2.Highlight Enable and press to toggle between On and Off. You will only be able to change the settings if Mail is enabled.

Document 900.0856 Rev B	59
02/08