HP 1200 manual Printer initialization/Cancel

Control panel light message (continued)

Light status Condition of the printer Action

Door open, media out, no toner cartridge, or media jam

The printer is in an error state that requires operator intervention or help.

Check the following:

●The toner door is completely closed.

●Media is loaded. See Loading media into the input trays for instructions.

●The toner cartridge is correctly installed in the printer. See Changing the toner cartridge for instructions.

●There is a media jam. See Clearing printer media jams for instructions.

	● The left side panel is completely closed.
Printer initialization/Cancel	No action is necessary.
Job/Cleaning Mode
A printer initialization is taking
place. If all lights blink for 1/2 of
a second or longer in a
sequence:

●the printing is initializing

●all previously sent print jobs are being purged

●a cleaning page is being printed

Fatal error

All lights are on.

●Turn the printer off and then back on.

●Unplug the printer for 5 minutes, and then plug it back in.

●If the printer still has an error, contact HP Support. See Service and support.

Accessory error	●	Remove the DIMMs and replace if
All lights are blinking.		necessary. See Memory (DIMM) for
		instructions.
	●	Contact HP Support. See Service and
		support.

106 Chapter 9 Troubleshooting the printer EN