HP 1200 manual IPX/SPX protocol information, Node Name, Primary Frame Type

	IPX/SPX protocol information
Message	Description
Status	The current IPX/SPX protocol status:
	Ready: The print server is waiting for data over IPX/SPX.
	Disabled: IPX/SPX was manually disabled.
	Initializing: The print server is registering the node address
	or name. An additional status message might also display.
	Note
	If the print server is not ready, an error code and message
	displays.
Node Name	The print server’s IPX/SPX name. The default name is
	NPIXXXXXX, where XXXXXX is the last six digits of the LAN
	hardware (MAC) address.
Primary Frame Type	The frame type selection on the print server:
	Auto Select: The print server automatically senses and limits
	the frame type to the first one detected.
	EN_802.3: The print server limits the frame type to IPX over
	IEEE 802.3 frames. All others frames are counted and
	discarded.
	EN_II: The print server limits the frame type to IPX over
	Ethernet frames. All others frames are counted and
	discarded.
	EN_802.2: The print server limits the frame type to IPX over
	IEEE 802.2 with IEEE 802.3 frames. All others frames are
	counted and discarded.
	EN_SNAP: The print server limits the frame type to IPX over
	SNAP with IEEE 802.3 frames. All others frames are counted
	and discarded.

EN Understanding the print server configuration page 177