HP 1200 manual Address

Tag	Description
ip	The IP address tag (required). This is the HP JetDirect print server’s IP
	address.
gw	The gateway IP address tag. This is the IP address of the default gateway
	(router) that the HP JetDirect print server uses to communicate with other
	subnets.
sm	The subnet mask tag. The HP JetDirect print server uses the subnet mask to
	identify the portions of an IP address that specify the network and
	subnetwork number and the host address.
lg	The syslog server’s IP address tag. This is the address of the server where
	the HP JetDirect print server sends syslog messages.
T144	A vendor-specific tag that specifies the relative path name of the TFTP
	configuration file. You can truncate long path names. The path name must be
	enclosed with quotes (for example, “pathname”). See Using DHCP for more
	information about file formats.
	Note
	Standard BOOTP option 18 (extensions file path) also allows a standard tag
	(ef) to specify the relative path name of the TFTP configuration file.
T150	The TFTP server’s IP address tag.
T151	A BOOTP-only tag. You must specify BOOTP-ONLYto ensure that other
	dynamic configuration methods, such as DHCP, are not used.

Use the following conventions for the bootptab file entries:

●A colon (:) indicates the end of a field.

●A backslash (\) indicates that the entry is continued on the next line.

●Spaces are not allowed between the characters on a line.

●Names, such as host names, must begin with a letter and can contain only letters, numbers, periods (for domain names only), or hyphens.

●The underscore character (_) is not allowed.

See your system documentation or online help for more information.

EN Using BOOTP 53