Message

Description

 

 

Config By

Specifies how the print server obtained its IP configuration:

 

BOOTP: Automatic configuration via a BOOTP server.

 

BOOTP/TFTP: Automatic configuration via a BOOTP server

 

and TFTP configuration file.

 

DHCP: Automatic configuration via a DHCP server.

 

DHCP/TFTP: Automatic configuration via a DHCP server and

 

TFTP configuration file.

 

RARP: Automatic configuration via the Reverse Address

 

Resolution Protocol.

 

User Specified: Manual configuration via Telnet, the printer’s

 

control panel, HP Web JetAdmin, an embedded Web server,

 

or another method.

 

Default IP: The default IP address was assigned. This

 

address might not be a valid address for your network.

 

Not Configured: The print server was not configured with IP

 

parameters. Make sure that TCP/IP is enabled, or check for

 

an error status.

 

 

BOOTP Server

This message displays if BOOTP, DHCP, or RARP is used for

or

TCP/IP configuration. This message specifies the IP address

DHCP Server

of the system that responds to the print server’s request for

or

automatic TCP/IP configuration over the network.

RARP Server

Not Specified: The configuration server’s IP address could

 

not be determined or was set to zero in the response packet.

 

 

BOOTP/DHCP Server

This message displays during initialization while the print

 

server attempts to obtain its TCP/IP configuration from a

 

BOOTP or DHCP server. The temporary address of 0.0.0.0

 

displays.

 

Not Specified: The configuration server’s IP address could

 

not be determined or was set to zero in the response packet.

 

 

TFTP Server

The IP address of the system where the TFTP configuration

 

file is located. During initialization, the temporary address of

 

0.0.0.0 displays.

 

Not Specified: A TFTP server has not been set.

 

 

Config File

The name of the print server’s configuration file. The file

 

pathname might be truncated to fit on two lines.

 

Not Specified: A file was not specified in the BOOTP reply

 

from the host.

174 Chapter 11 Troubleshooting the print server

EN

Page 176
Image 176
HP 1200 manual Config By, Bootp Server, Dhcp Server, Rarp Server, BOOTP/DHCP Server, Tftp Server, Config File