Bootptab file entries
The following is an example of a /etc/bootptab file entry for an HP JetDirect print server:
picasso:\
:hn:\
:ht=ether:\
:vm=rfc1048:\
:ha=0001E6123456:\
:ip=192.168.45.39:\
:sm=255.255.255.0:\
:gw=192.168.40.1:\
:lg=192.168.40.3:\
:T144=“hpnp/picasso.cfg”:
| Note that the configuration data contains tags that identify the |
| various HP JetDirect parameters and their settings. The following |
| table describes these tags. |
|
|
Tag | Description |
|
|
nodename | The name of the peripheral. This is an entry point to a list of parameters for a |
| specific peripheral. This must be the first tag in an entry. (In the example, the |
| nodename is picasso.) |
|
|
hn | The host name tag. This tag does not take a value, but it causes the BOOTP |
| daemon to download the host name to the HP JetDirect print server. The |
| host name is printed on the HP JetDirect configuration page or a network |
| application returns the host name on an SNMP sysName request. |
|
|
ht | The hardware type tag. For the HP JetDirect print server, set this tag to |
| ether (for Ethernet) or token (for Token Ring). This tag must precede the |
| ha tag. |
|
|
vm | The BOOTP report format tag (required). Set this tag to rfc1048. |
|
|
ha | The hardware address tag. The hardware (MAC) address is the HP JetDirect |
| print server’s |
| HP JetDirect configuration page as the Hardware Address. On |
| HP JetDirect external print servers, this address is also printed on a label |
| attached to the print server. |
52 Chapter 3 Getting to know the print server | EN |