HP 1200 manual To install the HP JetDirect 175X hardware

1

2

To install the HP JetDirect 175X hardware

1Use a network cable to connect the 175X to the network.

2Use the USB cable to connect the 175X to your printer.

3	Attach the power module to the print
	server.
4	Plug the module’s power cord into a
5	power receptacle.

5 The 10 and 100 LED should be green, indicating that there is a network connection. The power/status LED should begin blinking. Within 15 seconds the power/status LED should be solid green.

3

6 To print a configuration page and verify the printer connection, press the Test button.

	7 Use the optional clip to physically
	attach the print server to the back of
6	your printer or any convenient
	location.

7

46 Chapter 3 Getting to know the print server EN