HP 1200 manual Gently pull the pickup roller up

5	5 Gently pull the pickup roller up and
	out.

6 Position the new or cleaned part in the slot of the previous pickup roller. See Cleaning the pickup roller for instructions.

6

7

Note

Circular and rectangular pegs on each side prevent you from incorrectly positioning the pickup roller.

7Rotate the top of the new pickup roller away from you until both sides snap into place.

8Reinstall the toner cartridge, and close the toner door.

9Plug the printer in to turn it back on.

8

9

132 Chapter 9 Troubleshooting the printer EN