HP 1200 manual Troubleshooting PostScript PS Errors, PS Errors Symptom Possible Cause Solution

Troubleshooting PostScript (PS) Errors

	The following situations are PS language specific and may occur
	when several printer languages are being used.
Note	To receive a printed or screen displayed message when PS errors
	occur, open the Print Options dialog box and click the desired selection
	next to the PS Errors section. You can also access this from the Print
	PS Errors check box in the HP LaserJet Device Configuration.
PS Errors
Symptom	Possible Cause	Solution

The job prints in Courier (the printer’s default typeface) instead of the typeface you requested.

The requested typeface is not downloaded. A personality switch may have been performed to print a PCL job just before the PS printing job was received.

Download the desired font and send the print job again. Verify the type and location of the font. Download to printer if applicable. Check with the software documentation.

A legal page prints with	Print job too complex.	You may need to print your job
clipped margins.		at 600 dots per inch, reduce
		the complexity of the page, or
		install more memory.

A PS error page prints. Print job may not be PS.

Make sure the print job is a PS job. Check to see whether the software application expected a setup or PS header file to be sent to the printer.

114 Chapter 9 Troubleshooting the printer EN