HP 1200 manual 4D CF ERR Access List Exceeded

Error Code and Message Description

4D CF ERR – ACCESS LIST EXCEEDED

The TFTP configuration file specified too many access list entries using the “allow:” keyword.

4E CF ERR – TRAP LIST EXCEEDED

The TFTP configuration file specified too many trap destination list entries using the “trap-destination:” keyword.

4F	TFTP REMOTE ERROR	The TFTP transfer of the configuration file from the host to the
		print server failed with the remote host sending a TFTP
		ERROR packet to the print server.
50	TFTP LOCAL ERROR	The TFTP transfer of the configuration file from the host to the
		print server failed with the local print server encountering
		some form of inactivity timeout or excessive retransmissions
		situation.
51	TFTP RETRIES	The overall retrying of the TFTP transfer of the configuration
EXCEEDED		file from the host to the print server has exceeded a retry limit.
52	BAD BOOTP/DHCP	An error was detected in the BOOTP or DHCP reply that the
REPLY		print server received. The reply either had insufficient data in
		the UDP datagram to contain the minimum BOOTP/DHCP
		header of 236 bytes, an operation field that was not
		BOOTPREPLY(0X02), a header field that did not match the
		print servers hardware address, or a UDP source port that
		was not the BOOTP/DHCP server port (67/udp).
53	BAD BOOTP TAG SIZE	The tag size in a vendor-specific field in the BOOTP reply is
		either 0 or greater than the remaining number of unprocessed
		bytes in the vendor-specified area.
54	BOOTP/RARP IN	The print server is currently in the process of obtaining its
PROGRESS		basic IP configuration information through BOOTP/RARP.
55	BOOTP/DHCP IN	The print server is currently in the process of obtaining its
PROGRESS		basic IP configuration information through BOOTP/DHCP and
		has not detected any errors.
56	DHCP NAK	The print server received a negative acknowledgement
		message from the DHCP server in response to a configuration
		request.

EN Understanding the print server configuration page 183