HP 1200 manual 0D LAN Error

Error Code and Message	Description
0D LAN ERROR –	There might be a problem with your network cabling or the
TRANSMITTER OFF	print server. Check the cabling and connectors on your
	Ethernet network. If you cannot find a problem with your
	network cabling, run the power-on self-test: remove and
	re-attach the power module connector on the print server. If
	the error persists, there is a problem with the print server.

0E LAN ERROR – LOSS OF CARRIER

Check the network connections. If the connections are intact, run the power-on self-test: remove and re-attach the power module connector on the print server. If the error persists, replace the print server.

10 LAN ERROR –	There might be a problem with your network cabling or the
UNDERFLOW	print server. Check the cabling and connectors on your
	network. If you cannot find a problem with your network
	cabling, run the power-on self-test: remove and re-attach the
	power module connector on the print server. If the error
	persists, there is a problem with the print server.

11LAN ERROR – RETRY FAULTS

There is a problem with your network cabling or external network configuration. Make sure that the hub or switch port is operating.

12	LAN ERROR –	With a 10Base-T or 100Base-TX port connected, Link Beat is
NO LINKBEAT		not sensed. Check the network cable, and make sure that the
		concentrator or hub is providing Link Beat.
13	NETWORK RECONFIG –	To enable the new configuration values, reset the print server
MUST REBOOT		or turn the print server off and back on.
28	OUT OF BUFFERS	The print server could not allocate a buffer from its internal
		memory. This means that all of the buffers are busy, which
		might be a result of heavy broadcast traffic or large amounts
		of network traffic directed to the print server.
40	ARP DUPLICATE IP	The ARP layer detected another node on the network using
ADDRESS		the same IP address as the print server. Extended error
		information below this message shows the hardware address
		of the other node.
41	NOVRAM ERROR	The print server cannot read the contents of its NOVRAM.

EN Understanding the print server configuration page 181