HP 1200 manual Removing the copier/scanner, On next

Removing the copier/scanner

1

2

To remove the copier/scanner from the printer, follow the instructions below:

CAUTION

If you remove the copier/scanner before you unplug the printer, you might damage your printer and scanner. You must also unplug the printer before you reinstall the copier/scanner on the printer.

1Turn off the power switch (220 v models only) and unplug the printer.

2Open and remove the left side panel.

3Pull up on the scanner cable to disconnect it from the printer.

4Slide the copier/scanner up and away from the printer.

Continued on next page.

3

4

EN Removing the copier/scanner 159