HP 1200 manual Turning the power off, Understanding voltage conversions

Turning the power off

If the printer requires 110-127 volts of power, you must unplug the printer to turn the power off. If the printer requires 220-240 volts, you can switch the printer off (the switch is located on the left side of the power plug) or unplug it.

WARNING! To ensure safety when working inside the printer for any reason, unplug the printer.

Understanding voltage conversions

Because of the different specifications, Hewlett-Packard does not offer a voltage conversion or support the voltage conversion of the U.S. version of the HP LaserJet family of printers for foreign use. If you plan on using the equipment outside of the United States, Hewlett-Packard advises you to purchase the products in the country/region where you will use them.

CAUTION Check your printer’s voltage requirement before you plug it in. Printers that require 110-127 volts of power will not work with 220-240 voltage outlets.

22 Chapter 1 Getting to know the printer EN