HP 1200 manual Error messages, Error Code and Message Description

Error messages

Error Code and Message		Description
02	LAN ERROR –	During a self-test, the print server detected an internal
INTERNAL LOOPBACK		loopback test error. The print server might be faulty. If the error
		persists, replace the print server.
03	LAN ERROR –	The print server is incorrectly connected to your network or it
EXTERNAL LOOPBACK		is defective. Make sure that your print server is correctly
		attached to your network. In addition, check the cabling and
		connectors.
07	LAN ERROR –	Check the network connections. If the connections are intact,
CONTROLLER CHIP		run the power-on self-test: turn the printer off and back on. If
		the error persists, replace the print server.

08LAN ERROR – INFINITE DEFERRAL

There is a network congestion problem.

Note

If the print server is not connected to the network, this error cannot occur.

09 LAN ERROR – BABBLE	Check the network connections. If the connections are intact,
	run the power-on self-test: turn the printer off and back on. If
	the error persists, replace the print server.
0A LAN ERROR – NO SQE	Check the network connections. If the connections are intact,
	run the power-on self-test: turn the printer off and back on. If
	the error persists, replace the print server.
0C LAN ERROR –	There might be a problem with your network cabling or the
RECEIVER OFF	print server. Check the cabling and connectors on your
	Ethernet network. If you cannot find a problem with your
	network cabling, run the power-on self-test: remove and
	re-attach the power module connector on the print server. If
	the error persists, there is a problem with the print server.

180 Chapter 11 Troubleshooting the print server EN