2 load originals and load paper

When you load your original document into the automatic document feeder (ADF), you can copy it onto a variety of paper types, weights, sizes, and transparency films. It's important to select the right paper, and to make sure it's loaded correctly.

This section contains the following topics:

load originals

load paper

recommended papers

papers to avoid

tips for loading other types of paper in the input tray

set the paper type

recommended paper-type settings for copying

set the paper size

avoid jams

load originals

Load your original in the ADF, which is located above the front panel as illustrated below, to copy it or to fax it.

If you are working with originals that are printed on 16-24 lb. (60-90 gsm) plain paper or on HP Premium Inkjet Paper, you can load more than one page at a time into the ADF. If you are working with photos or originals of an non-standard size (no smaller than 3.25 x 3.25 inches or 82 x 82 millimeters), load them in the ADF one page at a time. When working with fragile, torn, or odd-sized originals, we recommend that you use a transparent document sleeve or sheet protector (available from most office-product stores) for the original. Place a single sleeve into the ADF with the sealed edge first and the transparent side down.

Note: If you have trouble with originals feeding incorrectly, make sure the ADF tray is snapped into position.

1Place the original(s) in the ADF

with the printed side facing toward the back and with the top of the document pointing down.

2 Adjust the document guides to fit your document.

5

Page 11
Image 11
HP 1230 Fax manual Load originals and load paper