The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration has implemented regulations for laser products manufactured since August 1, 1976. Compliance is mandatory for products marketed in the United States. The printer is certified as a “Class 1” laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968.
Since radiation emitted inside the printer is completely confined within protective housings and external covers, the laser beam cannot escape during any phase of normal user operation.
WARNING! Using controls, making adjustments, or performing procedures other than those specified in this user guide may result in exposure to hazardous radiation.
Canadian DOC RegulationsComplies with Canadian EMC Class B requirements.
«Conforme à la classe B des normes canadiennes de compatibilité électromagnétiques «CEM».»
LED SafetyThe infrared port on the front panel of this printer is classified as a Class 1 LED (Light Emitting Diode) device according to International Standard IEC
λIf the printer requires service, contact an authorized HP service center.
λDo not attempt to make any adjustments of the printer.
λAvoid direct eye exposure to the infrared LED beam.
λBe aware that the beam is invisible light and cannot be seen.
λDo not attempt to view the infrared LED beam with any type of optical device.
136 Appendix A Specifications | EN |