Service Error

An error has occurred that has caused the printer to halt the current print job. Pressing the GO button or the JOB CANCEL button with this message has no effect.

To clear the error, turn the printer off and then on again. If the problem persists, leave the printer off for 15 minutes to reset the formatter. If the problem continues, contact HP Service.

Accessory Error

An error has occurred with one of the accessories, either the EIO port or the DIMM slots, that has caused the printer to halt the current print job. Pressing the GO button or the JOB CANCEL button with this message has no effect.

Pressing the GO and JOB CANCEL buttons simultaneously and then releasing the buttons will cause the printer to display a secondary light pattern that will indicate the error code corresponding to the current error condition. See “Accessory Error” on page 105.

EN

Chapter 4 Problem Solving 101