Installing an HP JetDirect EIO Card

1

2

3

1Turn the printer off, and disconnect the power cord.

2Open the interface cable door by pressing on the release tabs. Disconnect all interface cables.

3Locate the EIO Slot. Firmly insert the HP JetDirect EIO card into the EIO slot. Twist in the retaining screws.

4Attach the appropriate network cable to the EIO card.

5Reinstall the interface cable(s) power cord. Reinstall the interface cable door. Turn the printer on.

Note

Print a PCL configuration page to check that the HP JetDirect EIO card appears as an installed option.

4

5

156 Appendix C Printer Memory and Expansion

EN