Note

Note

Make sure the toner cartridge is not empty when using the toner cartridge cleaning. A near empty toner cartridge may also cause print defects. This 10-minute process consumes toner and if used often can reduce toner cartridge life.

Starting the Cleaning Process

1.Make sure the printer is turned on and in the ready state. Make sure there is paper loaded in Tray 2.

2.Press and hold the Go and Job Cancel buttons until all lights flash. This will take about 10 seconds. Release the buttons when the lights flash.

3.For engine cleaning, press the Go button, or

for cartridge cleaning, press the Job Cancel button.

4.Discard the blank page produced from the engine cleaning process.

The cartridge cleaning process takes about 10 minutes. To stop the toner cartridge cleaning process, turn the printer off.

74 Chapter 3 Printer Tips and Maintenance

EN