Installing Memory

1

2

3

4

5

CAUTION

Static electricity can damage dual in-line memory modules (DIMMs). When handling DIMMs, either wear an antistatic wrist strap or frequently touch the surface of the DIMMs’ antistatic package, then touch bare metal on the printer.

If you have not already done so, print a configuration page to find out how much memory is installed in the printer before adding more memory.

1After the configuration page is printed, turn the printer off and disconnect the power cord.

2Open the interface cable door by pressing on the release tabs. Disconnect all interface cables.

3Open the top cover.

4Press the release button and slide the right side panel forward until the alignment arrows line up.

5Pull the panel away from the printer, exposing the available DIMM slots.

Continued on next page

EN

Appendix C Printer Memory and Expansion 153