Reloading Media into Tray 2 or Optional Tray 3

1

2

3

1Pull the desired tray out of the printer.

2Push down on the metal paper lift plate to lock it in place.

3Add the media and make sure it is flat in the tray at all four corners. Keep the media below the height tabs on the paper length guide in the rear of the tray.

4Slide the tray back into the printer.

Note

Whenever you remove a tray from the printer, always push down the metal paper lift plate before you put it back. The metal paper lift plate releases and lifts the paper up when you push the tray into the printer.

4

32 Chapter 2 Printing Tasks

EN