Chapter 8: Diagnostics/Maintenance

Card Maintenance/Replacement

This section defines the proper procedure for making changes to the card configuration of your Tenor CMS chassis.

When the WAN card (Front Application card) is inserted in a slot, it connects to an associated Rear Transition Module (RTM) in the rear of chassis. The transition module is inserted into the rear of the chassis and corre- sponds to the card in the front slot; it provides the physical cabling and external interface connections. Not all cards contain Front Application and RTM cards. Front Application cards measure 160mm x 233mm and Rear Transition Module / Interface Cards measure 80mm x 233mm, (half the size of the Front Application Cards).

See below for a description of each cards’s overlay label, whether a Rear Transition Module is required, along with slot installation and special instructions.

CAUTION: Mixing of Front Application and Rear Transition Module (RTM) card types, may cause dam- age to the cards and the chassis and may void your warranty.

Table 8-2Cards/Slot Installation Guidelines

Card/

Rear Transition

 

 

Overlay

Module/Overlay

Slot Installation

Special Instructions

Label

Label

 

 

 

 

 

 

 

 

 

 

System

None

CMS (14 slot): Slot

Slot 14/chassis rear must not be populated

Controller

 

14/chassis front

when System Controller card is in Slot 14/

 

 

 

front slot.

 

 

 

Shipped with a filler panel in Slot 14/chassis

 

 

 

rear.

 

 

 

 

CPU

CPU Interface

CMS (14 slot): Slot

CPU Interface card is also labeled CPU and

 

 

14/chassis front

must be installed rear slot 14, directly behind

 

 

(right most)

the CPU front application card for the pair to

 

 

CMS 2/8 slot: Slot 1

function properly.

 

 

The CPU Interface Card must only be matched

 

 

(bottom slot)

 

 

 

with a CPU Application card.

 

 

 

 

DSP

None

CMS (14 slot): Rec-

Shipped with a filler panel in rear to cover

 

 

ommend Slot 6

each rear slot that has a DSP card populated in

 

 

through 13/chassis

front slot when initially shipped from factory.

 

 

front, adjacent to

 

 

 

System Controller

 

 

 

card

 

 

 

 

 

E1 WAN

E1 WAN Interface

CMS (14 slot): Rec-

Matching E1 WAN and E1 WAN Interface

 

 

ommend Slot 1-4/

cards installed in the same slot number in front

 

 

chassis front

and rear when shipped from factory.

 

 

 

E1 WAN Interface cards must only be

 

 

 

matched with Front Application E1 WAN

 

 

 

cards and no other type of Front Application

 

 

 

card.

 

 

 

 

P/N 480-0005-00-15

8-13

Page 153
Image 153
HP 480-0005-00-15 manual Card Maintenance/Replacement, 2Cards/Slot Installation Guidelines, Card Rear Transition