HP 480-0005-00-15 manual What’s included?, About this Guide

About this Guide

What’s included?

This product guide is divided into chapters; each chapter describes a specific topic. The following chapters are included:

•About this Guide: Describes what is included in the Product Guide, including typographical conventions.

•Chapter 1: Overview. Includes a general overview of the product, including a description of the Tenor CMS’s features and capabilities.

•Chapter 2: Hardware Components. Hardware description, including the chassis, WAN cards (T1, E1, DS1), DSP Resource cards and the CPU/System Controller Card.

•Chapter 3: Installation. Describes how to install the Tenor CMS unit, including how to connect, power up and assign the IP address.

•Chapter 4: Getting Started via Command Line Interface (CLI). This chapter tells you how to access the CLI and execute commands. A description of each CLI mode is also included.

•Chapter 5: Working with SNMP. This chapter describes the SNMP protocol and how to use it with the Tenor CMS.

•Chapter 6: Call Detail Recording. Describes the Call Detail Recording (CDR) feature, including how to set up the CDR server and assign a password. In addition, instructions for reading CDR output is also included.

•Chapter 7: System Alarms. Describes how to monitor and view alarms via Command Line Interface (CLI).

•Chapter 8: Diagnostics/Maintenance. Describes how to troubleshoot and monitor the health of the sys- tem.

•Chapter 9: Using IVR. Describes the Interactive Voice Response (IVR) system for support of pre-paid and post-paid calls.

•Appendix A: Getting Acquainted with Tenor CMS in the VoIP Network. A general overview of VoIP and how it relates to the Tenor CMS switch.

•Appendix B: Specifications/Approvals: A list of Tenor CMS’s specifications and approvals.

•Glossary

•Index

•Warranty

2 P/N 480-0005-00-15