
Chapter 5: Working with SNMP
2.Configure the unit.
OR
Launch CLI by double-clicking as follows:
Launch Tenor CMS CLI by
1.From the HP Openview desktop,
The CLI will launch with the IP address of the unit associated with that icon (the correct IP address will appear in the URL).
2.Configure the unit as defined in Chapter 4: Getting Started with Command Line Interface (CLI).
Set up Tenor CMS status polling
The following explains how to configure HPOV to determine and display unit status if the Tenor CMS is not configured to send traps. Polling is only intended for Tenor CMS units which are not accessible to configure the network manager IP address using the Tenor CMS’s Command Line Interface (CLI). We do not recom- mend polling more than 10 Tenor CMS units.
1.From the HP Openview desktop,
2.From the Attributes window, select Quintum Tenor CMS attributes.
3.Click on Edit Attributes.
4.Select Turn on Tenor Status Polling (the toggle allows you to set to True or False). Select True.
5.Click on Verify. After the verification is complete, click Ok.
Polling occurs in a 30 second interval, or whenever a Tenor CMS trap is received.
Set up Debug Message Display window
The following explains how to display debug messages that are generated by the quintum.exe. This window is used to troubleshoot HPOV processing events for the Tenor CMS icons.
1.From the HP Openview desktop,
2.From the Attributes window, select Quintum Tenor CMS.
3.Click on Edit Attributes.
4.Select Turn on Debug Window (the toggle allows you to set to True or False). Select True.
5.Click on Verify. After the verification is complete, click Ok.
The Debug Message Display window will appear that displays debug messages being processed that are asso- ciated with that icon, only one window can be opened at a time.
P/N |