HP 480-0005-00-15 manual DB-9 Serial RS-232 Cable for CPU card

Chapter 2: Hardware Components

DB-9 Serial RS-232 Cable (for CPU card)

The Serial RS-232 9-pin cable with a DB-9 male connector (with RS-232 interface) is used to connect the Tenor CMS to your PC’s asynchronous serial port. The pin order for DB-9 male and female connectors are shown in Figure 2-35and Figure 2-36.

Figure 2-35DB-9 Male Connector Pin Order

1 2 3 4 5

6 7 8 9

Figure 2-36DB-9 Female Connector Pin Order

5 4 3 2 1

9 8 7 6

Figure 2-37DB-9 Connector Pinouts

Pin #	Connects to	Pin #
1		1
2			2
3			3
4			4
5		5
6			6
7			7
8			8
9			9

Table 2-15DB-9 Connector Pinouts

Pin #	Function	Description	Pin #
1	RSVD	Reserved	1
2	RXD	Receive Data	2
3	TXD	Transmit Data	3
4	RSVD	Reserved	4
5	GND	Signal Ground	5
6	RSVD	Reserved	6
7	RSVD	Reserved	7
8	RSVD	Reserved	8
9	RSVD	Reserved	9

P/N 480-0005-00-15 2-36