HP 480-0005-00-15 manual Rear View with AC power, Strain Relief Mount Fuse

Chapter 2: Hardware Components

Rear View (with AC power)

Figure 2-10Tenor CMS240 Rear View - AC unit

Strain Relief Mount Fuse

	DS1		Link TX/RX	Link TX/RX	10/100 Ethernet	8	7		6	5	4	3	2			1
1	CPU	Config	Off			Console	Ethernet	10/100					4	3	26	15	Link
0
			On 1 2 3 4														TX/RX
									4	3	2	1	2	7
													8

Power Inlet

Wrist Strap Ground Socket

Supplementary

Earth Ground

On/Off Power Switch

Card Slots

•Strain Relief Mount. The Strain Relief Mount enables you to connect the power cord strain relief to the unit. A power cord strain relief is a plastic device designed to avoid accidental power down of the Tenor CMS (i.e., if the power cord is accidentally pulled, the strain relief will relieve pressure put on the cord).

•Power Inlet. Inlet for which you insert the supplied AC power cord. The unit requires 110-240 VAC.

•On/Off Power Switch. A switch to turn power on and off.

•Fuse. Replaceable fuse. See Chapter 8: Diagnostics/Maintenance for more information.

•Supplementary Earth Ground. A supplementary earth ground connection is provided.

•Card Slots. The rear of the cards requiring a transition module (T1, E1, DS1, CPU) is used for network connection. The quantity will vary depending upon the number of cards you have inserted.

•Wrist Strap Ground Socket. Socket available in which to connect an ESD wrist strap for ESD protec- tion.

2-12 P/N 480-0005-00-15