HP 480-0005-00-15 manual 20Main Backup Screen

Chapter 3: Installation

Figure 3-20Main Backup Screen

5.Enter the Tenor CMS IP Address for the IP address of the unit where the file that you would like to backup is located.

6.Enter your User ID.

7.Enter the password.

8.Click Backup to continue. The backup procedure will begin. When completed, a message will display to tell you where the backup files have been located (i.e., c:\Tenor_CMS\Backup_09-15-2002). This message will also ask you if you want to proceed with the upgrade of the selected system software. Click Yes to continue the upgrade.

9.A window will appear asking you to select the directory in which the new upgrade will be installed from.

10.Select the appropriate upgrade file (i.e., c:\Tenor_CMS\CMSupgrade2-2-1) file and click Ok. The Quin- tum Tenor CMS Upgrade Utility window will be displayed.

11.Enter the Tenor CMS IP Address for the IP address of the unit you want to upgrade.

12.Enter your User ID.

13.Enter the password.

14.Click Upgrade (to Cancel, click on Cancel). When completed, a message will alert you that the software and configuration settings have been updated.

15.Click on Release Notes to display the latest Release Notes; click on Continue to reset the unit. The unit will reset.

P/N 480-0005-00-15 3-22