Chapter 8: Diagnostics/Maintenance

Figure 8-1WAN Interface Board Handles

Alarm Status

CPU PCI

1 2 DSP Bank

1

2 Link TX/RX

10/100 Ethernet

QUINTUMTM

TECHNOLOGIES,

INC.

Span

Status

1 5

2 6

3 7

4 8

DS1

Hot Swap

Front View

Side View

Side View

Open position

Closed position

 

6.With the handles in the open position, slide the new card firmly into the slot until the card feels engaged.

7.Push on the inserter/extractor handles in toward each other to the closed position to lock the card in place (see Figure 8-1).

8.Turn the power switch to on and the blue LED will light momentarily and extinguish.

9.Re-tighten the handle anchoring screws, one in each handle with a #1 Phillips screwdriver.

P/N 480-0005-00-15

8-15