HP CP5520 Laser CP5520 manual Resizing Options, Actual Size, Print Document On, Scale to Fit

Resizing Options

The Resizing Options group box consists of the following controls:

●Actual Size (default)

●Print Document On

●Scale to Fit

●% of Actual Size

Actual Size

Actual Size is the default setting. It prints the document without changing the document size.

Print Document On

Click the Print Document On option to format the document for one paper size and then print the document on a different paper size, with or without scaling the image to fit the new paper size.

The Print Document On control is disabled by either of the following conditions:

●The % of Actual Size value is not 100.

●The Pages per Sheet value (on the Finishing tab) is not 1.

When Print Document On is selected, the drop-down menu shows the paper sizes on which you can print. The list contains all of the standard paper sizes that the selected paper source supports and any custom sizes that you have created. When Print Document On is selected, Scale to Fit is automatically selected. Clear this check box if you do not want your document reduced or enlarged to fit on the selected paper.

Scale to Fit

The Scale to Fit option box specifies whether each formatted document page image is scaled to fit the target paper size. By default, Scale to Fit is selected when Print Document On is selected. If the setting is turned off, then the document page images will not be scaled, and are instead centered at full size on the target paper. If the document size is larger than the target paper size, then the document image is clipped. If it is smaller, then it is centered within the target paper. The following figure shows

64 Chapter 4 HP PCL 6 print driver for Windows ENWW