Table 4-1 PCL 6 custom paper sizes
Tray |
| Dimensions | Minimum | Maximum | |
|
|
|
|
| |
Tray 1 | Width | 76 mm (3 in) | 320 mm (12.6 in) | ||
multipurpose) |
|
|
| ||
Length | 127 mm (5 in) | 356 mm (18.5 in) | |||
|
| ||||
|
|
|
|
| |
Tray 2 | Width | 148.0 mm (5.83 in) | 297 mm (11.7 in) | ||
|
|
|
|
| |
|
| Length | 182.0 mm (7.1 in) | 432 mm (17.0 in) | |
|
|
|
| ||
Trays 3 — 6 | Width | 148.0 mm (5.8 in) | 297 mm (11.7 in) | ||
|
|
|
|
| |
|
| Length | 210 mm (8.27 in) | 432 mm (17.0 in) | |
|
|
|
|
| |
Paper source
The Paper source setting specifies the source tray to use for printing a document. The list of source trays depends on the product accessories that are installed. Any optional source trays that are installed through the Device Settings tab also appear here.
The Paper source
●Automatically select
●Printer Auto Select
●Manual Feed in Tray 1
●Tray 1
●Tray 2
●Tray 3
●Tray 4 (HP Color LaserJet CP5525xh only;
●Tray 5 (HP Color LaserJet CP5525xh only;
●Tray 6 (HP Color LaserJet CP5525xh only;
The default setting is Automatically Select. When this setting is selected, the HP Color LaserJet Enterprise CP5520 Series Printer uses the source tray that supports the paper size that you have selected. If you select a source tray other than Automatically select, make sure that the correct paper size is loaded in the source tray. For information about paper sources, see Media attributes and commands on page 151 .
Paper type
The Paper type
56 | Chapter 4 HP PCL 6 print driver for Windows | ENWW |
