HP P3005 manual Fuser, Back cover see Back cover on Cover see I/O cover on

Fuser

1.Remove the following components:

●Back cover (see Back cover on page 72)

●I/O cover (see I/O cover on page 72)

2.Remove the duplexer inlet guide by releasing two tabs (callout 1) on the guide, and then sliding the guide toward the back of the device.

1

Figure 5-16Removing the fuser (1 of 3)

Reinstallation tip Make sure that both tabs snap back into place when reinstalling the duplexer inlet guide.

ENWW Fuser 83