HP P3005 manual Embedded I/O BAD Transmission, Unexpected Size in Tray, Load Tray, Xxxxx Error

Control panel message	Description	Recommended action
40 EMBEDDED I/O BAD TRANSMISSION	The connection with the HP Jetdirect	1.	Press to continue printing.
alternates with	embedded print server has broken.
				NOTE Data will be lost.
To continue press
		2.	If the message persists, contact
			HP Support.

41.3 UNEXPECTED SIZE IN TRAY

alternates with

LOAD TRAY X

Media is loaded that is longer or shorter in the feed direction than the size configured for the tray.

1.Press to print from a different tray.

2.To print from the current tray, load the tray with the size and type indicated.

Ensure that all trays are configured correctly before printing again. See Load input trays on page 19 for more information.

41.5 UNEXPECTED TYPE IN TRAY X	The device senses a different media type
alternates with	than what is configured in the tray.
LOAD TRAY X

1.Press to print from a different tray.

2.To print from the current tray, load the tray with the size and type indicated.

Ensure that all trays are configured correctly before printing again. See Load input trays on page 19 for more information.

41.X ERROR	A device error has occurred.	1.	Press	to continue or press for
alternates with			more information.
To continue press		2.	If the message persists after exiting
			help, turn the device off and then on.
		3.	If the message persists, contact
			HP Support.
49.XXXXX ERROR	A critical firmware error has occurred.	1.	Turn the device off and then on.
alternates with		2.	Try to determine whether the error
Power off then on			occurs intermittently, while printing, or
			when turning on the device.
		3.	If the error appears while printing,
			determine whether it occurs when
			printing from a specific computer, a
			specific application, or a specific file. If
			all other computers, applications, or files
			can print without the error, then the
			problem may be only within one print job
			or computer. Make sure the computer
			has the most current printer drivers, or
			use a generic printer driver.
		4.	Go to www.hp.com/support/LJP3005.
			Click Download Drivers and
			Software. Check for the latest firmware
			image version at the bottom of the page.
			If this firmware image is newer than the
			one installed on the device and the
			device can receive a firmware update,
			download the newer firmware upgrade.
		5.	Try printing a job from a different
			software program. If the job prints, go

ENWW Control-panel messages 137