HP P3005 manual Paper feed guide assembly

Paper feed guide assembly

1.Remove the following components:

●All covers (see Covers on page 69)

●Formatter (see Formatter on page 80)

●ECU (see Engine control unit (ECU) on page 88)

●Access plate (see Access plate on page 96).

●Fuser (see Fuser on page 83)

●High-voltage power supply (see High-voltage power supply on page 97)

2.Lift one non-captive grounding spring (see callout 11 in Figure 5-36Grounding-spring locations on page 102 out of the device.

3.Loosen the grounding wire from the routing guides (callout 1).

CAUTION Do not bend or remove the grounding wire.

4.Remove two screws (callout 2).

2

1

Figure 5-38Removing the paper feed guide assembly

5.On the edge of the assembly farthest from you, lift the right corner up, twist the assembly counterclockwise, and remove the assembly from the device.

104 Chapter 5 Removal and replacement ENWW