HP P3005 USB Storage File System is Full, USB Storage is Write Protected, USB Storage X Removed

Control panel message	Description	Recommended action
To clear press		If the message reappears, a problem might
		exist in the software program.
USB STORAGE FILE SYSTEM IS FULL	The device received a PJL file system	1.	Use HP Web Jetadmin software to
alternates with	command that attempted to store something		delete files from the storage device, and
	on the file system but was unsuccessful		then try again.
Ready	because the file system is full.	2.	To remove this message from the
To clear press			display, press .
USB STORAGE IS WRITE PROTECTED	The file system is protected and no new files	1.	To enable writing to the storage device,
alternates with	can be written to it.		use HP Web Jetadmin to turn off write
			protection.
Ready		2.	To remove this message from the
To clear press			display, turn the device off and then on.
USB STORAGE X REMOVED	The USB storage accessory was removed	1.	Turn the device off.
	while the device was turned on.	2.	To continue using the USB storage
			accessory, reinstall it.
		3.	Turn the device on.
USE TRAY X <TYPE> <SIZE>	The device is offering a selection of alternate	1.	Use	and	to highlight a different
	media to use for the print job.		size or type, and then press to select
			the size or type.
		2.	Press	to return to the previous size
			or type.

See Load input trays on page 19 for more information.

ENWW Control-panel messages 147