HP P3005 manual Test pages, Engine-test

Table 6-2Diagnostics menu (continued)

Item	Values	Explanation
PAPER PATH TEST	No values available	Generate a test page, which is useful for testing the paper-
		handling features of the device.

●PRINT TEST PAGE

		● PRINT TEST PAGE	Press the to start the paper-path test using the source
●	SOURCE		(tray), destination (output bin), duplex, and number of copies
●	DUPLEX		settings that you set in the other items on the PAPER PATH
			TEST menu. Set the other items before selecting PRINT TEST
●	COPIES		PAGE.

●SOURCE

●ALL TRAYS

●TRAY 1

●* TRAY 2

●TRAY N

Select the tray for the paper path that you want to test. You can select any tray that is installed. Select ALL TRAYS to test the paper path for every tray. Paper must be loaded in the selected trays.

●DUPLEX

●*OFF

●ON

Determine whether or not the paper goes through the duplexer during the paper path test. This item is available only if the duplexer is installed.

● COPIES	Set how many sheets of media are used from each tray during
	the paper-path test.

●*1

●10

●50

●100

●500

Test pages

Printing test pages helps you determine whether or not the device engine and the formatter are functioning.

NOTE Information pages also can be used to solve device issues. See Use information pages on page 38.

Engine-test page

To verify that the device engine is functioning, print an engine-test page.

1.Remove the right-side cover (see Right-side cover on page 69).

2.Press the engine-test-page button (callout 1) near the formatter.

ENWW Troubleshooting tools 165