HP P3005 manual Management tools, Use information pages, Description How to print

Management tools

Use information pages

From the device control panel, you can print pages that give details about the device and its current configuration. The table below provides the procedures for printing the information pages.

Page description	How to print the page
Menu map	1.	Press Menu.
Shows the control-panel menus and	2.	Press	to highlight INFORMATION, and then press .
available settings.	3.
		If PRINT MENU MAP is not highlighted, press		or	until it is highlighted,
		and then press .

The content of the menu map varies, depending on the options currently installed in the device.

For a complete list of control panel menus and possible values, see the user guide.

Configuration page	1.	Press Menu.
Shows device settings and installed	2.	Press	to highlight INFORMATION, and then press .
accessories.

3.Press to highlight PRINT CONFIGURATION, and then press .

NOTE If the device contains an HP Jetdirect print server or an optional hard disk drive, an additional configuration page prints that provides information about those devices.

Supplies status page	1.	Press Menu.
Shows print-cartridge toner levels.	2.	Press	to highlight INFORMATION, and then press .

3.Press to highlight PRINT SUPPLIES STATUS PAGE, and then press .

NOTE If you are using non-HP supplies, the supplies status page might not show the remaining life for those supplies. For more information, see

HP policy on non-HP print cartridges on page 34.

Usage page	1.	Press Menu.
Shows a page count for each size of	2.	Press	to highlight INFORMATION, and then press .
paper printed, the number of one-sided
(simplexed) or two-sided (duplexed)	3.	Press	to highlight PRINT USAGE PAGE, and then press .
pages, and the average percentage of

coverage.

38 Chapter 3 Maintenance ENWW