HP P3005 manual Reinstallation notes for the gear assembly

Reinstallation notes for the gear assembly

Reinstallation tip Close the cartridge door and press the large gear against the device chassis before you start to reinstall the gear assembly.

Reinstallation tip The spring (callout 4) has a "locating pin" that should be inserted into the small hole in the gear-assembly plate before reinstallation.

Reinstallation tip Use the rod (callout 5) on the gear-assembly plate as a locator to find the correct positioning of the gear assembly. Insert the rod into the hole in the lower gear on the device chassis.

5

4

Figure 5-43Reinstalling the gear assembly

110 Chapter 5 Removal and replacement ENWW