HP P3005 manual Or Sleep mode on, Settings tab

Tab or section	Options
	● Event log: Shows a list of all device events and errors.
	● Usage page: Shows a summary of the number of pages the device has printed,
	grouped by size and type.
	● Device Information: Shows the device network name, address, and model
	information. To change these entries, click Device Information on the Settings tab.
	● Control Panel: Shows messages from the device control panel, such as Ready
	or Sleep mode on.
	● Print: Allows you to send print jobs to the device.
Settings tab	● Configure Device: Allows you to configure device settings. This page contains the
Provides the ability to configure the	traditional menus found on devices using a control-panel display.
	● E-mail Server: Network only. Used in conjunction with the Alerts page to set up
device from your computer
	incoming and outgoing e-mail, as well as to set e-mail alerts.
	● Alerts: Network only. Allows you to set up to receive e-mail alerts for various device
	and supplies events.
	● AutoSend: Allows you to configure the device to send automated e-mails regarding
	device configuration and supplies to specific e-mail addresses.
	● Security: Allows you to set a password that must be entered to gain access to the
	Settings and Networking tabs. Enable and disable certain features of the
	embedded Web server.
	● Edit Other Links: Allows you to add or customize a link to another Web site. This
	link is displayed in the Other Links area on all embedded Web server pages.
	● Device Information: Allows you to name the device and assign an asset number to
	it. Enter the name and e-mail address for the primary contact who will receive
	information about the device.
	● Language: Allows you to determine the language in which to display the embedded
	Web server information.

●

●

Date & Time: Allows time synchronization with a network time server.

Wake Time: Allows you to set or edit a wake time for the device.

NOTE The Settings tab can be password-protected. If this device is on a network, always consult with the system administrator before changing settings on this tab.

42 Chapter 3 Maintenance ENWW