HP P3005 manual Access plate

Access plate

1.Remove the following components:

●Back cover (see Back cover on page 72)

●I/O cover (see I/O cover on page 72)

●Duplexer inlet guide (see Figure 5-16 Removing the fuser (1 of 3) on page 83)

2.At the front of the device, push the green button on the top, right front of the tray 2 opening to release the access plate.

Figure 5-29Removing the access plate (1 of 2)

3.At the back of the device, press one tab (callout 1) to release the access plate, and then lower the access plate until the other side slides off of the other tab (callout 2).

1

2

Figure 5-30Removing the access plate (2 of 2)

4.Slide the pan out of the device.

96 Chapter 5 Removal and replacement ENWW