The default setting is Off. You might want to turn this setting on and enter a prefix if, for example, you have to dial a number such as 9 to get a telephone line outside of your company telephone system. While this setting is active, you can dial a fax number without the dial prefix by using manual dial.

1.From the Home screen, touch the Setup button.

2.Touch the Fax Setup menu.

3.Touch the Basic Setup menu.

4.Scroll to and touch the Dial Prefix button, and then touch the On button.

5.Use the keypad to enter the prefix, and then touch the Done button. You can use numbers, pauses, and dialing symbols.

Set tone-dialing or pulse-dialing

Use this procedure to set the product to tone-dialing or pulse-dialing mode. The factory-set default is Tone Dialing. Do not change this setting unless you know that the telephone line cannot use tone dialing.

NOTE: The pulse-dialing option is not available in all countries/regions.

1.From the Home screen, touch the Setup button.

2.Touch the Fax Setup menu.

3.Touch the Basic Setup menu.

4.Scroll to and touch the Dial Type button, and then touch the Tone Dialing or Pulse Dialing button.

Set autoredial and the time between redials

If the product was unable to send a fax because the receiving fax machine did not answer or was busy, the product attempts to redial based on the redial-on-busy, redial-on-no-answer, and redial-on- communication-error options.

Set the redial-on-busy option

If this option is on, the product redials automatically if it receives a busy signal. The factory-set default for the redial-on-busy option is On.

1.From the Home screen, touch the Setup button.

2.Touch the Fax Setup menu.

3.Touch the Advanced Fax Setup menu.

4.Touch the Redial Setup button.

5.Scroll to and touch the Busy Redial button, and then touch the On button.

ENWW

Set fax settings 133