HP PRO X476 MFP manual Performs a fax test to verify that the phone cord is plugged

Menu item	Sub-menu item	Sub-menu item	Description
	Error Correction Mode	On*	The error correction mode allows the sending device to re-
		Off	transmit data if it detects an error signal.
	Confirm Fax Number	On	Sets whether the product confirms a fax number before sending.
		Off*
	Fax Speed	Fast (33600 bps)*	Sets the fax communication speed.
		Medium (14400 bps)
		Slow (9600 bps)
	Fax forwarding	On (Print and	Forwards the fax to another fax machine. Select the print and
		Forward)	forward option to print a hard copy.
		On (Forward)
		Off*
	Fax Report	On (Fax Send)*	Prints a fax information page based on the selected settings.
		On (Fax Receive)
		On (Send and
		Receive)
		Off
	Restore Fax Defaults		Resets all fax configurations to their factory defaults.
Fax Tools	Reprint Faxes in		The product reprints all stored faxes.
	Memory
	Run Fax Test		Performs a fax test to verify that the phone cord is plugged in the
			correct outlet and that there is a signal on the phone line. A fax
			test report is printed indicating the results.
	Clear Fax Log		Clears all faxes in memory.
Fax Reports	Last Transaction		Prints a detailed report of the last fax operation, either sent or
			received.
	Fax Log		Prints the last 30 entries in the fax log.
	Speed-Dial List		Prints a list of the speed dials that have been set up for this
			product. The speed-dial list holds up to 99 numbers.
	Caller ID Report		Prints a list of all incoming fax phone numbers, up to the
			maximum of 30 numbers.
	Junk Fax Report		Prints a list of phone numbers that are blocked from sending
			faxes to this product.

20 Chapter 2 Control panel menus ENWW